Volume 4 (2023)
Volume 3 (2022)
Volume 2 (2021)
Volume 1 (2020)
Number of Articles: 92
Review of Steel Material Engineering and Its Application in Industry
Volume 4, Issue 1 , January 2023, , Pages 61-67
Abstract
According to an old definition, steels are alloys of iron and carbon in which the amount of carbon varies up to 1.7% and elements such as manganese, silicon in amounts less than 1%, ... Read MoreScreening of Twenty Plant Powders for Potency in Stored Maize
Volume 2, Issue 2 , April 2021, , Pages 64-70
Abstract
The maize weevil, Sitophilus zeamais (Motschulsky), is a field-to-store primary pest in tropical and subtropical regions which causes up to 20-30% damage to stored maize grains.Twenty ... Read MoreCloud Point Extraction of Trivalent Chromium from Aqueous Solutions Using Different Nonionic Surfactants
Volume 4, Issue 2 , August 2023, , Pages 68-76
Abstract
Cloud point extraction (CPE) of trace metals from aqueous solutions is based on clouding phenomena of non-ionic surfactant used. This work aimed to separate Cr (III) ions from water ... Read MoreMicrogrid Control to Ensure Stability and Increase Flexibility in Storage Applications
Volume 3, Issue 2 , April 2022, , Pages 69-76
Abstract
The purpose of this paper is to use energy storage resources in the microgrid to control its voltage and frequency. Today, due to the manifestation of the benefits of microgrids, the ... Read MoreThe Need for Risk Assessment in Occupational Health
Volume 2, Issue 2 , April 2021, , Pages 71-76
Abstract
In today's world, accidents are considered as one of the most important risk factors of economic, health, social and even political. Studies have shown that the main cause of most accidents ... Read MoreInvestigation of the Complex of Cream Instruments in the Steel and Oil Industry
Volume 1, Issue 1 , August 2020, , Pages 75-81
Abstract
In recent years, the complexing mechanisms of various organic compounds, especially carboxylic acids in trivalent cream baths have been studied. Complexes with a certain minimum stability ... Read MoreTheory and Computer Programming for the Optimization of Combinatorial Problems
Volume 2, Issue 2 , April 2021, , Pages 77-81
Abstract
Combinatorial optimization problems spans through several applications such as task scheduling and resources allocation, where an optimal element is to be determined from the analysis ... Read MoreThe Need to Study the Effects of Energy Carrier Management Challenges on National Security in Iran (A Mini Review)
Volume 3, Issue 2 , April 2022, , Pages 77-86
Abstract
Energy carriers as one of the important inputs of production and also consumer goods of households, play a very important role in determining production costs and household expenditures. ... Read MoreInvestigating the Microscopic Structure of Cast Iron and Its Application in Industry
Volume 4, Issue 2 , August 2023, , Pages 77-85
Abstract
Introduction: Metallography in the general sense is the study of the internal structure of metals and alloys and the relationship of this structure with the composition, production ... Read MoreInvestigation of the Effect of Additives on the Morphology of Cr-WC Nano Composite Coatings
Volume 1, Issue 1 , August 2020, , Pages 82-90
Abstract
SDS and saccharin additives were used in the production of Cr-WC nano composite coatings. SDS is an anionic surfactant, and the purpose of adding it was to fertilize the surface of ... Read MoreA Self-Regulated E-Learning System using Adaptive Hypermedia Architecture
Volume 2, Issue 2 , April 2021, , Pages 82-89
Abstract
Electronic learning has changed the conventional pattern of studying in the universities for some decades back, especially in developing countries. Its innovative nature of instructional ... Read MoreNavigating the Promise and Perils of Artificial Intelligence: A Comprehensive Analysis of Risks and Benefits
Volume 4, Issue 2 , August 2023, , Pages 86-91
Abstract
Artificial intelligence (AI) has become a popular topic in recent years due to the rapid advancements in technology. With the rise of AI, there are many potential benefits that it can ... Read MoreEffects of additional mechanisms on the performance of workshop crane
Volume 3, Issue 2 , April 2022, , Pages 87-98
Abstract
Typically, mobile machine shop-cranes are used in applications where a lifting solution is needed for operation in a small area or within a large industrial facility that has limited ... Read MoreInvestigation of Clathrite-Like Hydrates in the Gas Phase
Volume 2, Issue 2 , April 2021, , Pages 90-94
Abstract
This paper investigates clathrite-like hydrates in the gas phase. Natural gas hydrate is a solid crystalline compound formed from a combination of water and gas, which is formed at ... Read MoreMethods for determining dispersed particles in coatings
Volume 1, Issue 1 , August 2020, , Pages 91-98
Abstract
In this research, cream-tungsten carbide nano composite coating was produced by electroplating method. In this section, the equipment used in this research, the materials used along ... Read MoreInvestigating the Effects of Environmental Applications on Decomposition of Zein Nanoparticles in Adsorbents in Industry
Volume 4, Issue 2 , August 2023, , Pages 92-108
Abstract
This study has investigated the environmental effects of the decomposition of zein nanoparticles in adsorbents in the petrochemical industry. Zein is a fibrous and protein polymer that ... Read MoreTreatment of Industrial Wastewater by DAF Method
Volume 2, Issue 2 , April 2021, , Pages 95-112
Abstract
The water consumed in life is somehow returned to the original sources, but most of the water that is returned to its original sources after application is not the same as the primary ... Read MoreInvestigation of Hydrate Formation Phenomenon and Hydrate Inhibitors
Volume 1, Issue 2 , December 2020, , Pages 99-110
Abstract
< p>Natural gas hydrate is a solid crystalline compound formed from the combination of water and gas and is part of the clathrite family. Guest gas molecules are trapped within ... Read MoreKnowledge Management in Organizations and Centers
Volume 3, Issue 2 , April 2022, , Pages 99-113
Abstract
Knowledge, or knowledge, is a structure for producing and organizing findings about the natural world, in the form of explanations and testable predictions of epistemology, dealing ... Read MoreA Float Zone Furnace Using Ellipsoidal Flood Light Reflectors
Volume 4, Issue 2 , August 2023, , Pages 109-127
Abstract
Optical float zone furnaces are used in crystal growth experiments where contact temperature measuring devices are not used, in order to avoid contamination. However, they are factory ... Read MoreOptimization of Market Clearing Process in Power System with NSGA Algorithm
Volume 1, Issue 2 , December 2020, , Pages 111-122
Abstract
Reactive power and voltage control are one of the most important ancillary services that is a very important role in network stability and optimum utilization of the market. If the ... Read MoreComprehensive Review of the Effect of Reactor Input Temperature Changes and Unit Capacity on Gasoline Octane Number
Volume 2, Issue 3 , June 2021, , Pages 113-118
Abstract
As mentioned above, the most important factors and parameters affecting the gasoline product octane number are the input temperature of the reactors and the capacity of the catalytic ... Read MoreIsolation and Removal of Halostonitrile from Water by Hybrid Adsorption and Nano Filtration System
Volume 3, Issue 2 , April 2022, , Pages 114-125
Abstract
In the present study, a hybrid method has been used to completely removal these compounds. This method is a combination of 3 different separation processes including ultra-filtration, ... Read MoreManagement of Urban Energy System Based on the Use of Train Model in CHP Systems
Volume 2, Issue 3 , June 2021, , Pages 119-128
Abstract
Prior to the use of fossil fuels, urban energy was supplied through biomass sources, mainly wood and coal. The sources of these materials had to be located in a certain area around ... Read MorePhysical Distribution of Nano particles by Ultrasonic Operation
Volume 1, Issue 2 , December 2020, , Pages 123-133